Replacing The Photo Sensor Board; Replacing The Dmd Board - Christie DHD410S Service Manual

Replacing the photo sensor board

To remove the photo sensor board, complete the following steps.
1. Remove the top cover.
See
Removing the top cover
2. Remove the main board.
See
Replacing the main board
3. Remove the combiner module.
See
Replacing the combiner module
4. Remove the color wheel.
See
Replacing the color wheel
5. Remove the one M2.6 screw with a Phillips Jewelers screwdriver securing the photo sensor
board.
6. Replace the photo sensor board.
7. To re-install, follow these steps in reverse order.

Replacing the DMD board

To remove the DMD board, complete the following steps.
1. Remove the top cover.
See
Removing the top cover
2. Remove the main board.
See Replacing the main board
3. Remove the combiner module.
See Replacing the combiner module
4. Remove the light engine.
See Replacing the light engine
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
on page 46.
on page 77.
on page 73.
on page 70.
on page 46.
on page 77.
on page 73.
on page 71.
Printed circuit boards and sensors
74