Christie DHD410S Service Manual page 51

See Removing the front cover
11. Remove the power supply.
See Replacing the power supply
12. Remove DMD fan.
See Replacing DMD fan
13. Remove fan1,2,3.
See Replacing fans 1, 2, and 3
14. Remove the AC inlet.
See Removing the AC inlet
15. Remove P/W fan.
See Replacing P/W fan
16. Remove the 12 M3 screws with a Phillips #1 screwdriver securing the bottom cover.
17. Remove three adjust foot securing bottom cover.
18. If required, replace the bottom cover.
19. To re-install, follow these steps in reverse order.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
on page 48.
on page 67.
on page 62.
on page 61.
on page 68.
on page 62.
Projector covers
51