Christie DHD410S Service Manual page 30

6. To write EDID in port VGA1, click OK.
Please change the cable to VGA2 will appear.
7. To write EDID in port VGA2, click OK.
Please change the cable to HDMI1 will appear.
8. To write EDID in port HDMI1, click OK.
Please change the cable to HDMI2 will appear. Connect P5 of the fixture with HDMI port 2 of
projector by HDMI(M) to DVI(F) cable.
9. To write EDID in port HDMI2, click OK.
OK will appear on the screen.
10. To verify the firmware version, unplug the power cord and USB cable, then re-plug the power
cord to power on the projector. Enter Service Mode to check the multimedia firmware version.
Consult your Christie dealer for more information when the firmware upgrade failure continuous.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
Firmware
30