Table of Contents
Advertisement
Performing a multimedia function test
The following browsers are supported for this test:
•
Internet Explorer: version 11 or higher is required.
•
Microsoft Edge: version 40 or higher is required.
•
Chrome: version 63 or higher is required.
•
Firefox: version 57 or higher is required.
•
Safari: version 11 or higher is required.
To perform the wireless function test, complete the following steps.
How to access Multimedia mode
1. Plug a USB flash drive into the USB connector at the back of the projector.
2. Press INPUT on the remote control or on the control panel to turn on the projector.
3. When the Input menu appears, press the up and down arrow keys to select Multimedia and
the Enter key to confirm.
Mobile display
To access the media files stored on your mobile device or tablet PC, do the following:
1. On Multimedia menu, select Mobile/Tablet.
2. On your mobile device or tablet PC, download EZview application App Store (iOS) or Play Store
(Android).
3. Enable your mobile device or tablet PC WiFi function, and search the AP name listed in the Wi-
Fi network list.
4. On the initial connection, you will be prompted to enter a password. Enter the password.
5. Launch EZview application and enter the PCTOOL password.
6. Wait until the connection is established.
The media files on your mobile device or tablet PC can be accessed using the projector.
Laptop display
To access the media files stored on your laptop/notebook, do the following:
1. On Multimedia menu, select Laptop.
2. Enable your laptop/notebook WiFi function, and search the AP name listed in the Wi-Fi
network list.
3. On the initial connection, you will be prompted to enter a password. Enter the password.
4. Open your web browser and type the IP address.
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
Service setups
21
Advertisement
Table of Contents
