Removing The Ac Inlet - Christie DHD410S Service Manual

Removing the AC inlet

To remove the AC inlet, complete the following steps.
1. Remove the top cover.
See
Removing the top cover
2. Remove the speaker.
See
Replacing the speaker
3. Remove the rear cover.
See
Removing the rear cover
4. Remove the left-side cover.
See
Removing the left-side cover
5. Remove the right-side cover.
See
Removing the right-side cover
6. Remove the main board, audio board and ECPIO board.
See
Replacing the main board
7. Remove the laser driver board.
See
Replacing the laser driver board
8. Remove the combiner module.
See
Replacing the combiner module
9. Remove the light engine.
See
Replacing the light engine
10. Remove front cover.
See
Removing the front cover
11. Remove the power supply.
See
Replacing the power supply
12. Remove DMD fan.
See
Replacing DMD fan
13. Remove fans 1, 2, 3.
See
Replacing fans 1, 2, and 3
DHD410S Service Manual
020-001481-01 Rev. 1 (10-2018)
on page 46.
on page 66.
on page 49.
on page 47.
on page 48.
on page 77.
on page 82.
on page 73.
on page 71.
on page 48.
on page 67.
on page 62.
on page 61.
Electronics
59