Releasing The Battery Retention Clip; Disconnecting The Remote Battery Cable - IBM Storwize V7000 Unified Problem Determination Manual

3. Press down on the left and right side latches and pull the server out of the rack
4. Remove the cover, as described in "Removing the cover" on page 87.
5. Locate the remote battery tray in the server and remove the battery that you
Battery
retention clip
Release
tab
Battery
Figure 32. Releasing the battery retention clip
Remote battery
cable connector
Figure 33. Disconnecting the remote battery cable
enclosure until both slide rails lock.
want to replace.
a. Remove the battery retention clip from the tabs that secure the battery to
the remote battery tray. See Figure 32.
Battery
tray
b. Lift the battery and battery carrier from the tray and carefully disconnect
the remote battery cable from the interposer card on the ServeRAID
controller. See Figure 33.
Remote battery cable
c. Disconnect the battery carrier cable from the battery.
d. Squeeze the clip on the side of the battery and battery carrier to remove the
battery from the battery carrier.
133
Chapter 4. File module