Deleting Backup Configuration Files Using The Cli - IBM Storwize V7000 Unified Problem Determination Manual

Deleting backup configuration files using the CLI

You can use the command-line interface (CLI) to delete backup configuration files.
About this task
Perform the following steps to delete backup configuration files:
Procedure
1. Issue the following command to log on to the system:
2. Issue the following CLI command to erase all of the files that are stored in the
268
Storwize V7000 Unified: Problem Determination Guide Version
pscp superuser@cluster_ip:/dumps/svc.config.backup.*
/offclusterstorage/
The cluster_ip is the IP address or DNS name of the system and
offclusterstorage is the location where you want to store the backup files.
Tip: To maintain controlled access to your configuration data, copy the backup
files to a location that is password-protected.
plink -i ssh_private_key_file superuser@control_enclosure_management_ip
where ssh_private_key_file is the name of the SSH private key file for the
superuser and control_enclosure_management_ip is the IP address or DNS name
of the system from which you want to delete the configuration.
/tmp directory:
svconfig clear -all