IBM Storwize V7000 Unified Problem Determination Manual page 118

Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type
made by the same manufacturer. The battery contains lithium and can explode if
not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
See "Battery return program" on page 92 for more information. Dispose of the
battery as required by local ordinances or regulations.
To install the replacement battery, complete the following steps:
Procedure
1. To help you work safely with Storwize V7000 Unified file module, read the
2. Follow any special handling and installation instructions that come with the
3. Insert the new battery:
4. Reinstall any adapters you removed in other procedures.
5. Reconnect any internal cables that you disconnected.
94
Storwize V7000 Unified: Problem Determination Guide Version
safety information in "Safety" on page xi, "Safety statements" on page xiii, and
"Installation guidelines" on page 58.
replacement battery.
a. Tilt the battery so that you can insert it into the socket on the side opposite
the battery clip.
b. Press the battery down into the socket until it clicks into place. Make sure
that the battery clip holds the battery securely.
c. If you removed a rubber cover from the battery holder, use your fingers to
install the battery cover on top of the battery connector.