IBM Storwize V7000 Unified Problem Determination Manual page 114

v To order replacement batteries, call 1-800-IBM-SERV within the United States,
Statement 2
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has a
module containing a lithium battery, replace it only with the same module type
made by the same manufacturer. The battery contains lithium and can explode if
not properly used, handled, or disposed of.
Do not:
v Throw or immerse into water
v Heat to more than 100°C (212°F)
v Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To remove the battery, complete the following procedure.
Procedure
90
Storwize V7000 Unified: Problem Determination Guide Version
disposed of with normal domestic waste. They will be taken back free of charge
by the manufacturer, distributor, or representative, to be recycled or disposed of
in a proper manner.
and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your support center or business partner.
Note: After you replace the battery, you must reconfigure the file module and
reset the system date and time.
1. To help you work safely with Storwize V7000 Unified file module, read the
safety information in "Safety" on page xi, "Safety statements" on page xiii,
and "Installation guidelines" on page 58.
2. Follow any special handling and installation instructions that come with the
battery.
3. Turn off the file module and peripheral devices, then label and disconnect
both power cords and all external cables.
4. Press down on the left and right side latches and pull the server out of the
rack enclosure until both slide rails lock.
5. Remove the cover, as described in "Removing the cover" on page 87.
6. Disconnect any internal cables, as necessary, making note of the cable routing
for later reinstallation.
7. Remove any adapters as necessary.
8. Locate the battery on the system board.