Dimm Locations For The Storwize V7000 Unified System X3650 M2 Server; Unified System X3650 M3 Server - IBM Storwize V7000 Unified Problem Determination Manual

8. If you are instructed to return the DIMM, follow all packaging instructions, and
Installing a memory module
The following procedure is for a Tier 1 customer replaceable unit (CRU).
Replacement of Tier 1 CRUs is your responsibility. If IBM installs a Tier 1 CRU at
your request, you will be charged for the installation. Service agreements can be
purchased so that you can ask IBM to replace these units.
About this task
See Figure 37 for DIMM locations for the Storwize V7000 Unified System x3650 M2
server and Figure 38 on page 140 for DIMM locations for the Storwize V7000

Unified System x3650 M3 server.

Figure 37. DIMM locations for the Storwize V7000 Unified System x3650 M2 server
Attention: To avoid breaking the retaining clips or damaging the DIMM
connectors, open and close the clips gently.
use any packaging materials for shipping that are supplied to you.
139
Chapter 4. File module