Upgrade Error Codes From Using The - IBM Storwize V7000 Unified Problem Determination Manual

290
Storwize V7000 Unified: Problem Determination Guide Version
Table 43. Upgrade error codes from using the applysoftware command and recommended
actions (continued)
Error Code
EFSSG4155I
EFSSG4156
EFSSG4156A
EFSSG4157
EFSSG4157I
EFSSG4158
EFSSG4158I
EFSSG4159
EFSSG4159I
EFSSG4160
EFSSA0201C
The applysoftware
command explanation
The applysoftware command
returned upgrade is already
running.
The specified International
Organization for
Standardization (ISO) does
not exist.
The applysoftware command
returned the specified ISO
does not exist.
The specific upgrade
International Organization
for Standardization (ISO)
content is not valid.
The applysoftware command
returned the specific upgrade
ISO invalid content.
The specific upgrade cannot
be installed over the current
version.
The applysoftware command
returned the specific upgrade
cannot be installed over the
current version.
The system is in an
unhealthy state and the
upgrade cannot start.
The applysoftware command
returned that the system is in
an unhealthy state and
upgrade cannot start.
The system has insufficient
file system space.
The license agreement has
not been accepted.
Action
Verify that the file actually
exists where specified. Also
verify that the command is
passing the correct location
parameters.
The package might be
corrupt. If this problem
persists, download a new
package and try again.
Check the upgrade
documentation and verify
that the level you are coming
from is compatible with the
level you are going to. If the
upgrade level is not
compatible, download the
correct level and try again. If
the upgrade level is
compatible and the error
persists, call the IBM Support
Center.
See Chapter 3, "Getting
started troubleshooting," on
page 9. Determine if the
system has issues.
At least 3 GB of space is
required. Remove unneeded
files from the /var file
system.