Master Boom (Foot) Switch - Toro Multi Pro 5800 Service Manual

Master Boom (Foot) Switch

The master boom switch is located on the floorboard of
the machine (Fig. 20). This switch allows the machine
operator to control the operation of all boom sections us-
ing one switch.
Testing
1. Locate switch and unplug wire harness connector
from switch.
2. The switch terminals are shown in Figure 21. Conti-
nuity should exist between the common terminal and
only one of the side terminals. When the switch is de-
pressed, continuity should exist between the common
terminal and the other side terminal. Regardless of
switch position, there should never be continuity be-
tween the two side terminals.
3. Reconnect the wire harness connector to the switch
after testing is completed.
Electrical System
2
1. Common terminal
Page 5 - - 16
1
Figure 20
1. Master boom switch
1
Figure 21
2. Side terminal
2
Multi Pro 5800