Service And Repairs; Fuses - Toro Multi Pro 5800 Service Manual

Service and Repairs

Sonic Boom Fuses
Fuses for the Ultra Sonic Boom system are includes in
the bottom four (4) fuse holders in the fuse block under
the operator seat (Fig. 17).
Fuse Identification and Function
Fuses for the Ultra Sonic Boom system have the follow-
ing function:
Fuse A (10 Amp): Protects power supply for TEC
outputs (diagnostic lamp, sonic sensors and hydrau-
lic solenoid coil S5).
Fuse B (10 Amp): Protects power supply for TEC
outputs (sonic boom light and hydraulic solenoid
coils S2 and S3).
Fuse C (10 Amp): Protects power supply for TEC
outputs (hydraulic solenoid coil S4).
Fuse D (2 Amp): Protects power supply for TEC lo-
gic.
Fuse Testing
Remove fuses from the fuse block for testing. Fuse
should have continuity between fuse terminals.
Ultra Sonic Boom System (Rev. A)
1. Fuse block
2. Sonic boom fuse A
3. Sonic boom fuse B
Page 7.1 - - 26
1
5
3
4
Figure 17
4. Sonic boom fuse C
5. Sonic boom fuse D
Multi Pro 5800
2