Using the Touch Screen
You add Sprayer information to the screen by touching
and enabling the individual icons.
•
Select any icon on the screen to display what is
shown on the screen.
•
Further options display when you press a particular
icon.
•
Select options as required.
•
Confirm the new display
Using the Master Switch
The master switch on the screen turns the sprayer
system on
(Figure
8). This switch does not work when
the section switches or the foot switch is off.
The master switch indicates the readiness of the
system by the following colors:
•
Green—indicates that the system is ready and the
sprayer controller is on and working.
•
White—sprayer controller is in standby.
•
Red—indicates that the system is not ready and
the sprayer controller is off and cannot be used.
The alarm bell button shows the number of active
alarms.
At any time, select to return to the main screen and
complete the necessary corrective action.
Selecting the Correct Units
of Measure
The following options are available: Metric, Imperial
(US), and Imperial (UK). The United States (US)
and the United Kingdom (UK) imperial options are
provided because gallons and fluid ounces have
different measurements in the US and the UK.
1.
Select the setup icon on the main screen
8).
2.
Select the user icon
3.
Select the region icon.
4.
Select the units icon.
5.
As needed, select the correct units and
application rate and confirm them.
(Figure
4).
(Figure
(Figure
7).
1. Unit catagories
2. Units icon
7
Figure 7
3. User icon
4. Region icon
g031187