Adjustments; Adjust Traction Pedal For Neutral - Toro Multi Pro 5800 Service Manual

Adjustments

Adjust Traction Pedal for Neutral

The piston (traction) pump control lever should return to
the neutral position when the traction pedal is released.
If the machine creeps when in neutral, adjust the traction
pedal neutral assembly (Fig. 42).
1. Loosen jam nut on spring shaft.
2. Adjust spring shaft until neutral operation is correct.
3. Tighten jam nut to secure adjustment.
Hydraulic System
1. Traction pedal
2. Rod end
Page 4 - - 52
2
3
4
1
Figure 42
3. Jam nut
4. Spring shaft
Multi Pro 5800