General Information; Operator's Manual; Precautions Concerning Chemicals Used In Spray System; Precautions For Removing Or Adjusting Spray System Components - Toro Multi Pro 5800 Service Manual

General Information

Operator's Manual

The Operator's Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your Multi Pro machine. Refer to that publi-
cation for additional information when servicing the ma-
chine.

Precautions Concerning Chemicals Used in Spray System

Chemicals can injure persons, animals, plants, soil or
other property. To eliminate environmental damage and
personal injury:
1. Select the proper chemical for the job.
2. Carefully read the directions printed on the chemical
manufacturer's labels before handling chemicals. In-
structions on chemical manufacturer's container labels
regarding mixing proportions should be read and strictly
followed.
3. Keep spray material away from skin. If spray material
comes in contact with a person, wash it off immediately
in accordance with manufacturer's recommendations
(container labels and Material Safety Data Sheets).

Precautions for Removing or Adjusting Spray System Components

1. Stop the vehicle and set the parking brake.
2. Shut off the vehicle's engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
Multi Pro 5800
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipment as recommended by the chemical manufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure line pressure is relieved before loosening
any system component.
Page 6 - - 3 Spray System