General Information; Installation Instructions; Precautions Concerning Chemicals Used In Spray System; Precautions For Removing Or Adjusting Spray System Components - Toro Multi Pro 5800 Service Manual

General Information

Installation Instructions

The Ultra Sonic Boom Kit Installation Instructions pro-
vides information regarding the installation, operation
and general maintenance for your Ultra Sonic Boom
System. Refer to that publication for additional informa-
tion when servicing the machine.

Precautions Concerning Chemicals Used in Spray System

Chemicals can injure persons, animals, plants, soil and
other property. To eliminate environmental damage and
personal injury:
1. Select the proper chemical for the job.
2. Carefully read the directions printed on the chemical
manufacturer's labels before handling chemicals. In-
structions on chemical manufacturer's container labels
regarding mixing proportions should be read and strictly
followed.
3. Keep spray material away from skin. If spray material
comes in contact with a person, wash it off immediately
in accordance with manufacturer's recommendations
(refer to container labels and Material Safety Data
Sheets).

Precautions for Removing or Adjusting Spray System Components

1. Park vehicle on a level surface and apply the parking
brake.
2. Shut off the vehicle's engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
Ultra Sonic Boom System (Rev. A)
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipment as recommended by the chemical manufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure spray system pressure is relieved before
loosening any system component.
Page 7.1 - - 2 Multi Pro 5800