Plumbing the CM-A and CM-Aux
To avoid damaging the tubing and column compartment cover latches,
Tip:
ensure the tubing is routed through the grooves in the sides, top, and bottom
of the column compartment.
Location of grooves in sides, top, and bottom of column compartment:
Location of grooves (3) on
left side and bottom of
column compartment
To plumb and configure the CM-A and CM-Aux, consult these pages:
•
For tubing connection and fittings information, see
and
page
77.
•
For information about configuring the new column configuration in the
software, see
•
For column installation information, see
page
78.
Grooves(3) on right side
and top of column
compartment
page
page
81.
Preparing the column compartments
68,
page
76,
53