Waters ACQUITY UPLC Operator's, Overview And Maintenance Manual page 41

7. Press the thermal gasket into the column compartment tray, ensuring
the gasket is centered and formed into the bottom of the tray, with equal
lengths on both sides.
8. Firmly press the column stabilizer assembly into the thermal gasket,
ensuring the thermal gasket uniformly envelops the sides of the column
stabilizer and does not bunch beneath it.
Thermal gasket visible along
both sides of stabilizer
Threaded holes for
Phillips screws
Column stabilizer assembly (two styles):
For 150-mm column
TP03425
For 50-mm or 100-mm column
Reusable fittings
Inlet tubing to injector
TP03123
Preparing the column compartments
Column-stabilizer-
inlet tubing
37