Waters ACQUITY UPLC Operator's, Overview And Maintenance Manual page 22

– Phillips
– Cable clamp nut
• Drain tubing
• Gloves: clean, powder-free, chemical-resistant
Required tools
• 1/4-inch open-end wrench
• 4-mm open-end wrench
• 3-mm hex wrench
• Phillips screwdriver
• Small flat screwdriver
• T20 TORX driver
MS-bracket kit major components:
Column heater housing
MS-bracket
18
®
screws
MS drip tray
TP03252
Height adjustment bracket
Hinge