Table of Contents
Advertisement
13. If removed, install the air baffle.
14. Install the access panel.
15. Install the front bezel.
16. Do one of the following:
If the server is in tower mode: Position the tower server for operation.
•
If the server is in rack mode: Install the server on the tray.
•
17. Connect all necessary external cabling to the expansion board.
For more information on these cabling requirements, see the documentation that ships with the option.
18. Connect all peripheral cables to the server.
19. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
20. Power up the server.
The installation is complete.
Internal USB device option
The server provides one internal USB 2.0 port and one USB 3.0 port. You can use these two ports to install internal USB
devices such as USB flash media devices. These devices are rarely removed and are used for booting up from flash
solutions or for data backup/redundancy.
90
Hardware options installation
Advertisement
Table of Contents
