Table of Contents
Advertisement
10. Install the system battery:
a. With the side of the battery showing the "+" sign facing up, insert the battery into the socket (callout 1).
b. Press the system battery down until it clicks into place (callout 2).
11. Install the access panel.
12. Install the front bezel.
13. Do one of the following:
If the server is in tower mode: Position the tower server for operation.
If the server is in rack mode: Install the server on the tray.
14. Connect all peripheral cables to the server.
15. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
System battery replacement
129
Advertisement
Table of Contents
