7.
If installed, remove the air baffle.
8.
Remove the PCI slot blank retainer.
9.
Remove the PCI slot blank.
10. Install the controller into a PCI slot.
11. Install the PCI slot blank retainer.
12. Cable the controller.
13. To enable HPE Smart Array SR SmartCache in a Smart Array P-class type-p Gen10 controller, install an energy
pack.
SmartCache and CacheCade enable solid-state drives to be used as caching devices for hard drive media. These
features accelerate access to frequently used data by caching hot data from the hard drives onto the solid-state
drives.
14. If removed, install the air baffle.
15. Install the access panel.
Hardware options installation
83