Table of Contents
Advertisement
b. Repeat step 12 to install a second hot-plug power supply in power supply bay 2.
14. If removed, install the air baffle.
15. Install the access panel.
16. Install the front bezel.
17. Do one of the following:
•
If the server is in tower mode: Position the tower server for operation.
•
If the server is in rack mode: Install the server on the tray.
18. Connect all peripheral cables to the server.
19. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
20. Power up the server.
The installation is complete.
Media device options
The server supports the following media device options:
SAS LTO tape drive
•
USB RDX tape drive
•
•
SATA optical drive
•
LFF non-hot-plug drive
58
Hardware options installation
Advertisement
Table of Contents
