2. Install the access panel.
3. Install the front bezel.
4. Do one of the following:
•
If the server is in tower mode: Position the tower server for operation.
If the server is in rack mode: Install the server on the tray.
•
5. Connect all peripheral cables to the server.
6. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
7. Power up the server.
Remove the PCI slot blank retainer
Procedure
1. Remove the PCI slot blank retainer:
a. Loosen the retainer thumbscrew.
b. Slide the retainer up, then remove it from the chassis.
30
Operations