Internal USB device options
The server has an internal USB 2.0 port that you can use to install an internal USB flash media device for:
•
booting up from flash solution
•
data backup/redundancy
Install an internal USB device
Procedure
1.
Power down the server.
2.
Disconnect the power cord from the AC source.
3.
Remove the power adapter cord from the power cord clip, and then disconnect the power adapter from the server.
4.
Disconnect all peripheral cables from the server.
5.
If installed, unlock and remove the security padlock and/or the Kensington security lock.
For more information, see the lock documentation.
6.
If the server is in a vertical orientation, position the server in a horizontal orientation.
52
Hardware options installation