Table of Contents
Advertisement
Use this option to configure the system BIOS.
•
Intelligent Provisioning (F10)
Use this option to deploy an operating system or configure storage.
•
Boot order (F11)
Use this option to make a one-time boot selection.
•
Network boot (F12)
Use this option to boot the server from the network.
Installing or deploying an operating system
Before installing an operating system, observe the following:
Be sure to read the HPE UEFI requirements for ProLiant servers on the Hewlett Packard Enterprise website. If UEFI
•
requirements are not met, you might experience boot failures or other errors when installing the operating system.
•
Update firmware before using the server for the first time, unless software or components require an older version. For
more information, see Keeping the system current.
For the latest information on supported operating systems, see the Hewlett Packard Enterprise website.
•
•
The server does not ship with OS media. All system software and firmware is preloaded on the server.
41
Setup
Advertisement
Table of Contents
