Table of Contents
Advertisement
For more information, see the lock documentation.
5. Do one of the following:
•
If the server is in tower mode: Position the tower server for hardware configuration.
•
If the server is in rack mode: Remove the server from the rack.
6. Remove the front bezel.
7. Remove the access panel:
a. Loosen the access panel thumbscrew.
b. Slide the access panel, and then lift it away from the chassis.
Install the access panel
Procedure
1. Install the access panel:
a. Place the access panel on the chassis and slide it toward the front of the server.
b. Tighten the access panel thumbscrew.
27
Operations
Advertisement
Table of Contents
