Danfoss VLT AQUA Instruction Manual page 150

5 How to program the adjustable frequency
drive
22-83 Speed at No-Flow [RPM]
Range:
Application [Application dependant]
dependent*
22-84 Speed at No-Flow [Hz]
Range:
Application [Application dependant]
dependent*
22-85 Speed at Design Point [RPM]
Range:
Application [Application dependant]
5
dependent*
22-86 Speed at Design Point [Hz]
Range:
Application [Application dependant]
dependent*
22-87 Pressure at No-Flow Speed
Range:
0.000 N/A* [Application dependant]
22-88 Pressure at Rated Speed
Range:
999999.999 [Application dependant]
N/A*
22-90 Flow at Rated Speed
Range:
0.000 N/A* [0.000 - 999999.999 N/A]
5-44
Function:
Function:
Function:
Function:
Function:
Enter the pressure H corresponding to speed at no-flow in reference/feedback units.
MIN
Function:
Enter the value corresponding to the pressure at rated speed in reference/feedback units. This value
can be defined using the pump datasheet.
Function:
Enter the value corresponding to flow at rated speed. This value can be defined using the pump
datasheet.
®
MG.20.P3.22 - VLT is a registered Danfoss trademark
VLT AQUA High Power Instruction Manual