Figure 58: Installing The Switch On A Concrete Wall - Allied Telesis x950 Series Installation Manual

6. Insert the four anchors into the holes.
7. Have two people hold the switch at the selected wall location while you
secure it to the wall with the four provided screws. Refer to Figure 58.
Figure 58. Installing the Switch on a Concrete Wall
8. Do one of the following:
To install the power supplies, go to "Installing PWR600 AC Power

Supplies" on page 78.
To install an optional XEM2 Ethernet Line Card, go to "Installing an

Optional XEM2 Ethernet Line Card" on page 82.
If all the components are installed, go to Chapter 8, "Verifying and

Configuring the Switch" on page 115.
x950 Series Installation Guide for Stand-alone Switches
113