Allied Telesis x950 Series Installation Manual page 70

Chapter 3: Beginning the Installation
70
5. Visually inspect the product for damage.
6. Visually inspect the front panel for the components shown in Figure 1
on page 18.
7. Verify that there are two pre-installed fan modules in FAN A and FAN
B slots on the rear panel. Refer to Figure 2 on page 19 and "FAN05
Cooling Fan" on page 37.
Note
Do not power on the switch if it is missing a fan module.
8. Go to "Verifying the Accessory Kit" on page 71.