Leds; Figure 4: Link And Activity Leds For Ports 1 To 24 On The X950-28Xtqm Switch; Table 3: Link And Activity Leds For Ports 1 To 24 On The X950-28Xtqm Switch - Allied Telesis x950 Series Installation Manual

LEDs

This section explains the LEDs for the 100Mbps and 1/2.5/5/10Gbps
twisted pair ports on the x950-28XTQm Switch. Each port has one LED
that displays link and activity information. The LEDs are shown in Figure 4.
Figure 4. Link and Activity LEDs for Ports 1 to 24 on the x950-28XTQm
The states of the link and activity LEDs are described in Table 3.
Table 3. Link and Activity LEDs for Ports 1 to 24 on the x950-28XTQm
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
Top Port LED
Switch
State
The port has established a 2.5Gbps,
5Gbps, or 10Gbps link to a network
device.
The port is transmitting or receiving data
at 2.5Gbps, 5Gbps or 10Gbps.
The port has established a 100Mbps or
1Gbps link to a network device.
The port is transmitting or receiving data
at 100Mbps or 1Gbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
x950 Series Installation Guide for Stand-alone Switches
Bottom Port LED
Switch
Description
25