Figure 56: Attaching The Switch To The Plywood Base - Allied Telesis x950 Series Installation Manual

Chapter 7: Installing the Switch on a Wall
110
Figure 56. Attaching the Switch to the Plywood Base
4. Do one of the following:
To install the power supplies, go to "Installing PWR600 AC Power

Supplies" on page 78.
To install an optional XEM2 Ethernet Line Card, go to "Installing an

Optional XEM2 Ethernet Line Card" on page 82.
If all the components are installed, go to Chapter 8, "Verifying and

Configuring the Switch" on page 115.