Twisted Pair Port Leds; Table 14: Link And Activity Leds For The Twisted Pair Ports On The Xem2-8Xstm Line Card - Allied Telesis x950 Series Installation Manual

Chapter 2: XEM2 Ethernet Line Cards
Twisted Pair Port
LEDs
46
Table 13. Twisted Pair Ports on the XEM2-8XSTm Line Card (Continued)
Specification
Cabling
Maximum Distance
Connector
Each port has a single LED that displays link and activity information. The
states of LEDs are described in Table 14.
Table 14. Link and Activity LEDs for the Twisted Pair Ports on the XEM2-
State
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
Description
Minimum cable requirements are:
- 100Mbps - Standard TIA/EIA 568-B-
compliant Category 3 unshielded
cabling.
- 1/2.5/5Gbps - Standard TIA/EIA 568-A-
compliant Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5 (Cat
5e) unshielded cabling.
- 10Gbps -Standard TIA/EIA 568-C-
compliant Category 6a unshielded
cabling.
100 meters (328 feet)
8-pin RJ-45
8XSTm Line Card
Description
The port has established a 2.5Gbps,
5Gbps, or 10Gbps link to a network
device.
The port is transmitting or receiving data
at 2.5Gbps, 5Gbps, or 10Gbps.
The port has established a 100Mbps or
1Gbps link to a network device.
The port is transmitting or receiving data
at 100Mbps or 1Gbps.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.