Figure 76. Installing 100Gbps QSFP28 Transceivers in XEM2-1CQ Line
Note
If you are ready to attach the fiber optic cable to the transceiver,
continue with the next step. Otherwise, repeat steps 1 to 4 to install
additional transceivers.
5. If the fiber optic connector on the transceiver has a dust cover, remove
the cover.
6. Connect the fiber optic cable to the connector on the transceiver. The
cable is keyed such that it can connect to the transceiver only one way.
7. Repeat this procedure to install additional transceivers.
x950 Series Installation Guide for Stand-alone Switches
Cards
137