Siemens SINAMICS S120 Function Manual page 65

Parameterization with STARTER
In the STARTER commissioning tool, the "Motorized potentiometer" parameter screen in the
project navigator under the relevant drive is activated by double-clicking "Setpoint channel" >
"Motorized potentiometer".
Function diagrams (see SINAMICS S120/S150 List Manual)
• 3001
• 2501
• 3020
Overview of important parameters (see SINAMICS S120/S150 List Manual)
• p1030[0...n]
• p1035[0...n]
• p1036[0...n]
• p1037[0...n]
• p1038[0...n]
• p1039[0...n]
• p1040[0...n]
• p1041[0...n]
• p1042[0...n]
• p1043[0...n]
• p1044[0...n]
• r1045
• p1047[0...n]
• p1048[0...n]
• r1050
• p1082[0...n]
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Setpoint channel overview
Internal control/status words - Control word, sequence control
Setpoint channel - Motorized potentiometer
Motorized potentiometer configuration
BI: Motorized potentiometer, setpoint, raise
BI: Motorized potentiometer, setpoint, lower
Motorized potentiometer, maximum speed
Motorized potentiometer, minimum speed
BI: Motorized potentiometer, inversion
Motorized potentiometer start value
BI: Motorized potentiometer, manual/automatic
CI: Motorized potentiometer, automatic setpoint
BI: Motorized potentiometer, accept setting value
CI: Motorized potentiometer, setting value
CO: Motorized potentiometer, speed setpoint in front of the
ramp-function generator
Motorized potentiometer, ramp-up time
Motorized potentiometer, ramp-down time
CO: Motorized potentiometer, setpoint after the ramp-function
generator
Maximum speed
Extended setpoint channel
3.2 Motorized potentiometer
65