Siemens SINAMICS S120 Function Manual page 850

Communication
11.3 Communication via PROFINET IO
PROFIenergy query commands
Query commands
List_Energy_Saving_Modes
Get_Mode
PEM_Status
PEM_Status_with_CTTO
PE_Identify
Query_Version
Get_Measurement_List
Get_Measurement_List_with_object
_number
Get_Measurement_Values
Get_Measurement_Values_with_obj
ect_number
850
Description
Determines all supported energy-saving modes.
Determines the energy-saving mode.
Determines the current PROFIenergy status.
Determines the actual PROFIenergy status, the same as for
the command "PEM status" and in addition with the regular
transition time to the operating state.
Determines the supported PROFIenergy commands.
Shows the implemented PROFIenergy profile.
Returns the measured value IDs that can be accessed using
the "Get_Measurement_Values" command.
Returns the measured value IDs and the associated object
number that can be accessed using the
"Get_Measurement_Values_with_object_number" command.
Returns the requested measured value using the measured
value ID:
For power measured values:
•
The command addresses the sum of the measured value
over all control drive objects.
For energy measured values:
•
The command returns the sum of the measured value over
all control drive objects.
For power factors:
•
This measured value is supported only for a SINAMICS
with a control drive object.
Returns the requested measured values using the measured
value ID and the object number. The object number corre-
sponds to the drive object ID.
The drive object ID of the Control Unit is used to address the
measured values as with "Get_Measurement_Value".
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Drive functions