Siemens SINAMICS S120 Function Manual page 41

Overview of important parameters (see SINAMICS S120/S150 List Manual)
• r0002
• r0046.0...29
• r0069[0...8]
• p0210[0...1]
• p0220[0...1]
• p0280
• p0840
• p0844
• p0852
• r0898.0...10
• r0899.0...12
• r2138.7...15
• r2139.0...15
• p3400
• r3405.0...7
• p3410
• r3411[0...1]
• r3412[0...1]
• p3508
• p3510
• p3533
• p3560
• p3610
• p3611
• p3624[0...1]
• p3625[0...1]
• r3626[0...1]
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Infeed operating display
CO/BO: Missing enable signals
CO: Phase current actual value
Device supply voltage
Infeed line filter type
DC link voltage maximum steady-state
BI: ON/OFF (OFF1)
BI: No coast down / coast down (OFF2)
BI: Enable operation / disable operation
CO/BO: Control word sequence control infeed
CO/BO: Status word sequence control infeed
CO/BO: Control word, faults/alarms
CO/BO: Status word, faults/alarms 1
Infeed configuration word
CO/BO: Infeed status word
Infeed identification method
Infeed inductance identified
Infeed DC link capacitance identified
Infeed step-up factor maximum
Infeed DC link voltage setpoint
BI: Infeed, inhibit regenerative operation
Infeed Vdc controller proportional gain
Infeed reactive current fixed setpoint
CI: Infeed reactive current supplementary setpoint
Infeed harmonics controller order
Infeed harmonics controller scaling
Infeed harmonics controller output
Infeed
2.1 Active Infeed
41