Siemens SINAMICS S120 Function Manual page 877

Table 11- 38 Instance Attribute
No.
1
2
3
4
5
6
7
Table 11- 39 Explanation for No. 5 of the previous table
Byte Bit
1
2
Assembly Object, Instance Number: 4 hex
Supported services
Class
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Service Type Name
get UINT16 Vendor ID
get UINT16 Device Type
- Siemens Drive
get UINT16 Product code
get UINT16 Revision
get UINT16 Status
get UINT32 Serial number
get Short Product name
String
Name
0 Owned
1 -
2 Configured
3 -
4 ... 7 Extended De-
vice Status
8 ... 11 -
12 ... 15 -
• Get Attribute single
Value/explanation
1251
0C hex
r0964[1]
-
See the following table
Bit 0 ... 19: consecutive number;
bits 20 ... 23: Production identifier
bits 24 ... 27: Month of manufacture (0 = Jan, B =
Dec)
Bits 28 ... 31: Year of manufacture (0 = 2002)
max. length 32 byte
Description
0: Converter is not assigned to a controller
1: Converter is assigned to a controller
Reserved
0: Ethernet/IP basic settings
1: Modified Ethernet/IP settings
Reserved
0: Self-test or status not known
1: Firmware update active
2: At least one I/O connection with error
3: No I/O connections
4: Incorrect configuration in the ROM
5: Fatal fault
6: At least one I/O connection is active
7: All I/O connections in the quiescent state
8 ... 15: Reserved
Not used
Reserved
Instance
Communication
11.5 Communication via EtherNet/IP
• Get Attribute single
• Set Attribute single
877