Function Diagrams And Parameters - Siemens SINAMICS S120 Function Manual

4.8.4

Function diagrams and parameters

Overview of important faults (see SINAMICS S120/S150 List Manual)
• F07419
Overview of important parameters (see SINAMICS S120/S150 List Manual)
• p0108[0...n]
• p1400[0...n]
• p5271[0...n]
• p5272[0...n]
• p5273[0...n]
• r5274
• p5275[0...n]
• r5276
• r5277
• p5280[0...n]
• p5281[0...n]
• p5282[0...n]
• p5283[0...n]
• p5284[0...n]
• r5285[0...n]
• p5292
• r5293
• r5294[0...5]
• r5295[0...5]
• p5296[0...2]
• p5297[0...2]
Drive functions
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Drive: Incorrect current setpoint filter adaptation
Drive object function module
Speed control configuration
Online / One Button Tuning configuration
Online tuning dynamic response factor
Online tuning load dynamic response factor
CO: Online / One Button Tuning dynamic response estimated
Online / One Button Tuning dynamic response time constant
Online / One Button Tuning Kv factor estimated
Online / One Button Tuning precontrol symmetrizing time estimated
Current setpoint filter adaptation configuration
Current setpoint filter adaptation assignment
Current setpoint filter adaptation lower limit frequency
Current setpoint filter adaptation upper limit frequency
Current setpoint filter adaptation activation threshold
Current setpoint filter adaptation current frequency
FFT tuning dynamic response factor
FFT tuning speed controller P gain identified
FFT tuning zero position identified
FFT tuning pole position identified
FFT tuning PRBS amplitude
FFT tuning PRBS offset
Servo control
4.8 Autotuning
133