Siemens SINAMICS S120 Function Manual page 730

Safety Integrated Basic Functions
10.11 Acceptance test and acceptance report
Safety logbook
Checksum for functional tracking of changes
Checksum for hardware dependent tracking of changes
Time stamp for functional tracking of changes
Time stamp for hardware dependent tracking of changes
1) These parameters can be found in the expert list of the Control Unit.
Data backup
Parameter
PLC program
Circuit diagrams
Countersignatures
Commissioning engineer
This confirms that the tests and checks have been carried out properly.
Date
Machine manufacturer
This confirms that the parameters recorded above are correct.
Date
730
Storage medium
Type Designation
Name
Name
Functional
1)
r9781[0] =
r9781[1] =
r9782[0] =
r9782[1] =
Date
Company/dept.
Company/dept.
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
Storage location
Signature
Signature
Drive functions