Echocmdno - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

EchoCmdNo

7.3.9
Description: This command is used to query or set the EchoCmdNo parameter.
The EchoCmdNo parameter is used to set whether the PDS-220Fx prefixes the Virtual
COM command to the corresponding response. (Virtual COM commands are used to
configure a PDS-220Fx through TCP port 10000)
Effect: Immediate
Command Arguments
EchoCmdNo
EchoCmdNo = 0
EchoCmdNo = 1
Example:
EchoCmdNo = 1
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
Description
Queries the EchoCmdNo settings.
If EchoCmdNo = 0, a Virtual COM command number will not
be prefixed to the corresponding response.
If EchoCmdNo = 1, a Virtual COM command number will be
prefixed to the corresponding response.
EchoCmdNo = 0
65