Command List - ICP DAS USA PDS-220F Series User Manual

ГК Атлант Инжиниринг – официальный представитель в РФ и СНГ
+7(495)109-02-08 sales@bbrc.ru www.bbrc.ru

Command List

7.3
Sec. Command
7.3.1 IPFILTER
7.3.2 IPCONF
7.3.3 SOCKET
7.3.4 COM
7.3.5 Broadcast
SystemTimeout
7.3.6
(ms)
SocketTimeout
7.3.7
(ms)
7.3.8 M
7.3.9 EchoCmdNo
7.3.10 EndChar
7.3.11 IP
7.3.12 MASK
7.3.13 GATEWAY
7.3.14 MAC
7.3.15 NAME
7.3.16 ALIAS
7.3.17 DHCP
7.3.18 UDP
7.3.19 VER
7.3.20 SAVE
7.3.21 LOAD
7.3.22 CONFIG
7.3.23 RESET
7.3.24 QUIT
PDS-220Fx Series User Manual (V1.2, Apr. 2015)
Description
Retrieves/Sets the IP addresses that are allowed to access the PDS-
220Fx.
Queries the network configuration. (IP/Mask/Gateway/MAC
addresses).
Lists all the status of sockets (Listen/Not Used Yet) together with the
type of each socket (TCP Server: Port No./UDP/Unused).
Queries or sets the configuration of the COM Ports (Baud Rate/Parity
/Stop Bits)
Queries or sets the Broadcast parameter, which determines whether
or not the module can receive Broadcast packets.
If PDS-220Fx has
SystemTimeout period,
automatically.
If there is no data send/receive on the connection during the
SocketTimeout period, the PDS-220Fx will close the connection
automatically.
Gets/Sets the echo mode.
/M0: Transparent Mode, Multi-Echo, Data-Shared.
/M1: Slave Mode, Single-Echo, None-Shared.
Queries or sets the EchoCmdNo parameter that enables or disables
adding Command Number before response.
Sets a character that determines the end of a response string.
Queries or sets the IP address.
Queries or sets the subnet Mask value.
Queries or sets the Gateway address.
Queries the MAC address.
Queries the module name.
Sets the alias for a PDS-220Fx.
Enables/Disables the DHCP client.
Sets whether to reply to a UDP search command.
Queries the version information
Determines whether or not backup copies of the "autoexec.bat" and
"vcom.ini" files are saved when using the "load" command.
Loads file to the built-in flash disk on PDS-220Fx. It should be used to
update firmware only.
Restores the factory default settings.
Reboots the PDS-220Fx module.
Exits the running firmware.
no network communications
the PDS-220Fx
during the
will reboot it-self
58