Christie Cinema 4K-RGB CP4315-RGB Service Manual page 68

5. Using a 3 mm driver, remove the three top screws and lower left screw securing the rear card
cage security bracket.
Using a 2.5 mm driver, remove the lower right screw securing the rear card cage security
bracket.
6. Remove the bracket.
7. Disconnect the diffuser harness (J135) from the diffuser interface board (DIB).
8. Remove the diffuser harness from the clip.
9. Using a 3 mm driver, remove the six screws securing the integrator assembly.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
68