Replacing The Low Voltage Current Source (Lvcs) Board - Christie Cinema 4K-RGB CP4315-RGB Service Manual
Hide thumbs
Also See for Cinema 4K-RGB CP4315-RGB:
- User manual (101 pages) ,
- Installation and setup manual (52 pages) ,
- Replacing (7 pages)
Table of Contents
Advertisement
Replacing the low voltage current source (LVCS)
board
1. Remove the laser driver card cage (on page 51).
2. Loosen the two captive screws securing the bottom cover plate and pivot to remove it.
3. Disconnect the LVCS harness connectors J162, J163, and J164.
4. Release the locking tab to slide the LVCS out of the cage and remove it.
5. Replace the LVCS.
6. To re-install, follow these steps in reverse order.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Printed circuit boards and sensors
85
Hide quick links:
Advertisement
Table of Contents
