Page 2
Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied warranties of fitness for a particular purpose.
Safety precautions Learn about the safety precautions related to the Christie Cinema 4K-RGB projector. This projector is intended for use in a cinema environment. General safety precautions Read all safety and warning guidelines before installing or operating the projector. Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product by Christie qualified technicians or electricians before it can be connected to power. • SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning, removing components, or opening any enclosure.
Page 12
"No direct exposure to beam shall be permitted". • The Christie Laser Projection System Installation Checklist must be fully completed after the installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This checklist can be found as a separate document in the accessory box with the manual.
Learn about the labels that may be used on the product. Labels on your product may be yellow or black and white. General hazards Hazard warnings also apply to accessories once they are installed in a Christie product that is connected to power. Fire and Shock Hazard To prevent fire or shock hazards, do not expose this product to rain or moisture.
For complete production documentation and technical support, go to www.christiedigital.com. Product documentation For installation, setup, and user information, see the product documentation available on the Christie website. Read all instructions before using or servicing this product. 1. Access the documentation from the Christie website: CP4315-RGB •...
Cinema 4K-RGB Specifications Guide (P/N: 020-102729-XX) Projector overview The Christie Cinema 4K-RGB projectors are medium brightness, RGB laser, digital cinema projectors. The RGB laser optical subassembly is directly coupled to the projector optical path and is housed within the projector chassis.
4. If the projector has a GDC IMB SR-1000 installed and configured, you can access the GDC IMB Web UI by using the Media Block tab. Technical support Technical support for Christie Cinema products is available at: • Support.cinema@christiedigital.com •...
For Red, Green, and Blue power levels, system stability may be affected if levels are set below the minimum (MIN) power limit shown. To ensure color and brightness are held at the required levels for your installation, Christie ™...
Page 28
System stability may be affected if you set a power level below the minimum power level recommended. When setting the Red or Green power level, Christie recommends setting a level below the maximum (MAX) limit shown. A value below the maximum limit ensures an optimal brightness that can be maintained over time.
A user account is a set of credentials consisting of both a user name and password that allows access to projector settings. Default user access permissions This table lists the Christie touch panel access permissions. Permission Description...
The marriage wizard requires you to confirm that the IMB has not been tampered with. 1. Install the IMB in the available slot on the projector. For more information, see the Christie IMB-S3 Installation and Setup Manual (P/N: 020-102582-XX) or the documentation provided by the IMB manufacturer.
A playlist is a list of content files and automated events that play in an order that you define. • To manage minor time gaps between content files, Christie recommends inserting a short period of black screen with no audio. To achieve this, you can insert a BLACK MOS clip into the playlist.
Adjusting the image Adjust the projector image. Christie recommends warming the lens before completing these procedures as focus may change as the lens warms. Correcting vignetting An image that is brighter at the center than it is at the sides needs vignetting correction.
Extreme misalignment of projection optics can cause permanent damage to critical optical components. Only Christie qualified technicians can perform internal optical adjustments. The integrator rod and fold mirror adjustments are set by Christie. Make adjustments only if screen shadows are visible.
Caution! If not avoided, the following could result in minor or moderate injury. • This procedure must be performed by Christie qualified technicians. When making the adjustments, set the light source to minimum power. To following steps are intended to achieve the highest quality image distributed across the full screen.
For the best stability, Christie recommends setting convergence while rotating the knobs in a clockwise direction. This may require first adjusting convergence by turning the knobs counter- clockwise, and finalizing the convergence with a clockwise approach.
4. In the Master Eye Selection list, select Right or Left for the primary projector. This option is not available when Active 3D Glasses is selected. 5. If using a Christie NAS device, select the Multi-Projector Sync of Content slider to automatically synchronize ingested content on the primary projector to all secondary projectors.
Related information Adding an action item to an existing macro (on page 86) Creating a macro (on page 85) Christie ACT actions These are the available built-in commands for the Christie ACT: Command Description Buzzer Activates the buzzer for the specified time (in milliseconds)
Page 100
Corporate offi ces Worldwide offi ces Christie Digital Systems USA, Inc. Africa Columbia Mexico United States (Arizona) ph: 714 236 8610 ph: +27 (0)11 510 0094 ph: +57 (318) 447 3179 ph: +52 55 4744 1790 ph: 602 943 5700...
Need help?
Do you have a question about the CP4315-RGB and is the answer not in the manual?
Questions and answers