Packing The Existing Light Engine - Christie Cinema 4K-RGB CP4315-RGB Service Manual

8. Remove the light engine from the projector.
9. Place the light engine on the light engine plate.
If you do not have the light engine plate, place the light engine on the snood.
10. Replace the light engine.
11. To re-install, follow these steps in reverse order.

Packing the existing light engine

Use the shipping brackets, shipping plate, and hardware from the light engine packaging to prepare
the existing light engine for return shipping.
1. Place the existing light engine onto the shipping base plate.
2. Using a 3 mm hex driver, tighten the three captive M4 screws and attach the light engine to
the base plate.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
72