Replacing The Shutter - Christie Cinema 4K-RGB CP4315-RGB Service Manual

Replacing the shutter

The shutter blocks the light coming into the projector lens.
1. Remove the top cover (on page 39).
2. Remove the light dump (on page 70).
3. Disconnect the two inline harnesses cables on the shutter.
4. Loosen the one captive screw securing the shutter.
Christie recommends using a short, right angle 3 mm allen key.
If a right angle allen key is unavailable, the engine can be removed for front access using the
provided straight 3 mm ball driver.
5. Pull out the shutter.
6. Replace the shutter.
7. To re-install, repeat these steps in reverse order.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
77