Christie Cinema 4K-RGB CP4315-RGB Service Manual page 35

3. Ensure the lens mount is centered vertically and horizontally.
4. Disconnect the lens mount harness.
5. Remove the harness cables from the four P-clips.
6. Using a 5 mm hex driver, loosen the two boresight alignment screws.
7. Using a 5 mm hex driver, loosen the pivot screw in the center of the lens mount.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Lens mount components
35