Replacing the mini-SAS cables
The mini-SAS harnesses move data from the light engine to the card cage.
1. Remove the light engine (on page 71).
2. Disconnect the red, green, and blue mini-SAS harnesses from the light engine.
3. Replace the mini-SAS harnesses.
4. Reconnect the mini-SAS harnesses to the light engine.
Make sure the access and bends are identical to what was installed or the harnesses do not
route properly.
5. Replace the light engine.
6. Reconnect the mini-SAS harnesses to the card cage.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Electronics
54